My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
The owners manual is very good. all my how to questions were answered in detail.
Text excerpt from page 8 (click to view)
How to use gas burners
Place the pot over the pot support fitted above the hob. For small pots with a diameter of less then 7� (175 mm), the trivet must be used in combination with the 2-zone wok burner. Make sure the trivet is securely fixed to the pot support. Push the appropriate control knob, turn it counter-clockwise to the setting �HI�. If the burner fails to ignite, check that: � the burner cap is positioned correctly; � the burner is clean and dry. To switch off the gas supply to the burner, turn the control knob, in a clockwise direction, to the �OFF� position. If the flames are not uniform, check to ensure When cooking or boiling in large pots or pans, ensure that there is a minimum distance of 2� (50 mm) between the pot and a heat-sensitive worktop. After combustion, the hot gases flow outwards under the base of the pot and may consequently burn the edge of the worktop if it is too close. Make sure there is a minimum distance of 5/8� (15 mm) between the pot or pan and the control panel. Never place a pot on the control panel. If the flames are irregular and yellow, check to ensure that a pressure regulator has been installed. Do not use the appliance and inform the installer. that the burner cap is properly positioned on the ring.
Right Wrong Right Wrong
Check to ensure that the burner is burning correctly. The flames should be blue and uniform.