The manual was everything that I wanted. Clearly printed and delivered in very quick time. Would certainly use again if I needed a manual in the future
Very good copy of Manual, clear and easy to print off, arrived very promptly and reasonably priced. Thanks, I will use you again
Text excerpt from page 60 (click to view)
Installing the oven
The oven must be installed into cabinetry before use. Do not insulate the cabinet. This will prevent proper ventilation. If the oven is to be installed under a counter top, a sealing strip must replace the stainless steel rail above the control panel. The sealing strip offers additional protection from any liquids that might spill down from the counter top. The strip can be purchased from Miele. ^ Connect the oven to the electrical supply. The oven must be supported from underneath. ^ Place the oven into the cabinet as far as the oven trim and align.
^ Open the oven door and locate the two mounting screw holes in the oven frame. Mark and drill 6 mm pilot holes. Secure the oven to the cabinetry by inserting screws through the frame and into the cabinetry. Only operate the appliance after it has been installed into the cabinetry.
